Lexmark MX822 Users Guide PDF - Page 123
Restricted Server List Options, Outbound Traffic Maximum
View all Lexmark MX822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Understanding the printer menus 123 Menu item Description Backup DNS Address Specify the backup DNS server addresses. Backup DNS Address 2 Backup DNS Address 3 Domain Search Order Specify a list of domain names to locate the printer and its resources that reside in different domains on the network. Enable DDNS Off* On Update the Dynamic DNS settings. DDNS TTL Specify the current DDNS settings. Default TTL DDNS Refresh Time Enable mDNS Off On* Update the multicast DNS settings. WINS Server Address Specify a server address for Windows Internet Name Service (WINS). Enable BOOTP Off* On Allow the BOOTP to assign a printer IP address. Restricted Server List Specify the IP addresses that are allowed to communicate with the printer over TCP/IP. Notes: • Use a comma to separate each IP address. • You can add up to 50 IP addresses. Restricted Server List Options Specify the access option for IP addresses that are not in the list. Block All Ports* Block Printing Only Block Printing and HTTP Only MTU Specify a maximum transmission unit (MTU) parameter for the TCP connections. 256-1500 Ethernet (1500*) Raw Print Port 1-65535 (9100*) Specify a raw port number for printers connected on a network. Outbound Traffic Maximum Speed Off* On Set the maximum transfer rate of the printer. Note: When enabled, the option for this setting is 100-1000000 Kilobits/second. Enable TLSv1.0 Off On* Enable the TLSv1.0 protocol. Note: An asterisk (*) next to a value indicates the factory default setting.