Lexmark MX822 Users Guide PDF - Page 95
Collate, Offset s, Notes, Staple, Punch, Copy from Size, Copy to Source, Darkness
View all Lexmark MX822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Understanding the printer menus 95 Menu item Description Collate Off [1,1,1,2,2,2] On [1,2,1,2,1,2]* Print multiple copies in sequence. Offset Pages None* Between Copies Between Jobs Offset the output of each print job or each copy of a print job. Notes: • Between Copies offsets each copy of a print job if Collate is set to On [1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages are offset, such as all page 1s and all page 2s. • Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed. • This menu item appears only when a staple finisher is installed. Staple Off* 1 staple, top left corner 2 staples, left 1 staple, top right corner 2 staples, top 1 staple, bottom left corner 2 staples, bottom 1 staple, bottom right corner 2 staples, right Specify the staple position for all print jobs. Note: This menu item appears only when a staple finisher is installed. Punch Off* 2 holes 3 holes Set the punch mode for all print jobs. Note: This menu item appears only when a staple finisher is installed. "Copy from" Size Set the paper size of the original document. Note: Letter is the U.S. factory default setting. A4 is the international factory default setting. "Copy to" Source Tray [x] (1*) Multipurpose Feeder Auto Size Match Specify the paper source for the copy job. Darkness 1 to 9 (5*) Adjust the darkness of the scanned image. Number of Copies 1-9999 (1*) Specify the number of copies. Note: An asterisk (*) next to a value indicates the factory default setting.