Lexmark MX822 Users Guide PDF - Page 78
Printer Emulations, Fax Configuration, Print Configuration, Device Operations
View all Lexmark MX822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Understanding the printer menus 78 Menu item Description Printer Emulations Emulator Security Reset Emulator After Job Off* On Reset the emulator after a print job. Printer Emulations Emulator Security Disable Printer Message Access Off On* Disable access to printer message during emulation. Fax Configuration Fax Low Power Support Disable Sleep Permit Sleep Auto* Set fax to enter Sleep mode whenever the printer determines that it should. Fax Configuration Fax Storage Location NAND Disk* Set the storage location for all faxes. Note: This menu item appears only when a hard disk is installed. Print Configuration Font Sharpening 0-150 (24*) Set a text point-size value below which the high‑frequency screens are used when printing font data. For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens. Print Configuration Print Density 1-5 (3*) Copy Density 1-5 (3*) Adjust the toner density when printing or copying documents. Print Configuration A4 Fuser Compress* Clip Set the fuser behavior when printing on a letter-size paper. Device Operations Quiet Mode Off* On Set the printer to operate in Quiet Mode. Note: Enabling this setting slows down the overall performance of the printer. Device Operations Safe Mode Off* On Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues. For example, when set to On, and the duplex motor is nonfunctional, the printer performs one‑sided printing of the documents even if the job is two‑sided printing. Note: An asterisk (*) next to a value indicates the factory default setting.