Lexmark MX822 Users Guide PDF - Page 89

Understanding the printer menus 89 Menu item Description Lines per Page 1-255 Specify the number of lines of text for each page printed through the PCL® data stream. Notes: • This menu item activates vertical escapement that causes the selected number of requested lines to print between the default margins of the page. • 60 is the U.S. factory default setting. 64 is the international factory default setting. PCL5 Minimum Line Width 1-30 (2*) Set the initial minimum stroke width of any job printed in 1200 dpi. PCLXL Minimum Line Width 1-30 (2*) A4 Width 198 mm* 203 mm Set the width of the logical page on A4‑size paper. Note: Logical page is the space on the physical page where data is printed. Auto CR after LF Off* On Set the printer to perform a carriage return after a line feed control command. Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line. Auto LF after CR Off* On Set the printer to perform a line feed after a carriage return control command. Tray Renumber Assign MP Feeder Assign Tray [x] Assign Manual Paper Assign Manual Envelope View Factory Defaults Restore Defaults • Configure the printer to work with a different print driver or custom application that uses a different set of source assignments to request a given paper source. • Show the factory default value assigned for each paper source. • Restore the tray renumber values to their factory defaults. Print Timeout Off On* (90 seconds) Set the printer to end a print job after it has been idle for the specified amount of time. Note: An asterisk (*) next to a value indicates the factory default setting. HTML Menu item Description Font Name Times* Set the font to use when printing HTML documents. Note: An asterisk (*) next to a value indicates the factory default setting.