Lexmark MX822 Users Guide PDF - Page 79
Device Operations, App Configuration, Notes, Scanner Configuration - maintenance kit
View all Lexmark MX822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Understanding the printer menus 79 Menu item Description Device Operations Minimum Copy Memory 20 MB* 30 MB 50 MB 80 MB 100 MB Set the minimum memory allocation for storing copy jobs. Device Operations Clear Custom Status Erase user‑defined strings for the Default or Alternate custom messages. Device Operations Clear all remotely‑installed messages Erase messages that were remotely installed. Device Operations Automatically Display Error Screens Off On* Show existing error messages on the display after the printer remains inactive on the home screen for a length of time equal to the Screen Timeout setting. Device Operations Honor orientation on fast path copy Off* On Enable the printer to use the orientation setting under the Copy menu when sending quick copy jobs. App Configuration LES Applications Off On* Enable the Lexmark Embedded Solutions (LES) applications. Notes: • When set to On, this setting does not affect built‑in applications. • This menu item appears only in the Embedded Web Server. Scanner Configuration Scanner Manual Registration Print Quick Test Print a Quick Test target page. Note: Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins must be reset. Scanner Configuration Scanner Manual Registration Front ADF Registration Rear ADF Registration Flatbed Registration Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board. Scanner Configuration Reset Maintenance Counter Resetting ADF Maintenance Counter Reset the counter after replacing the ADF maintenance kit. Scanner Configuration Edge Erase Flatbed Edge Erase (3*) ADF Edge Erase (3*) Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job. Note: An asterisk (*) next to a value indicates the factory default setting.