Lexmark X502n Service Manual - Page 180
Low voltage power supply (LVPS) with cage removal, Transfer belt unit removal
View all Lexmark X502n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
7100-XXX Low voltage power supply (LVPS) with cage removal 1. Remove the transfer belt unit. See "Transfer belt unit removal" on page 4-5. 2. Remove the RIP board cage. See "System board cage removal" on page 4-38. 3. Remove the grounding terminal screw (A). 4. Disconnect the power supply bracket connector (B). 5. Remove three screws (C) that attach the power supply bracket; remove the power supply bracket. CD B A C 6. Remove the screw (D), and disconnect all the connectors from the LVPS. 7. Remove three metal screws (E) and 3 plastic screws (F) that attach the LVPS with the cage; remove the LVPS with the cage. F E F 4-40 Service Manual
4-40
Service Manual
7100-XXX
Low voltage power supply (LVPS) with cage removal
1.
Remove the transfer belt unit. See
“Transfer belt unit removal” on page 4-5
.
2.
Remove the RIP board cage. See
“System board cage removal” on page 4-38
.
3.
Remove the grounding terminal screw (A).
4.
Disconnect the power supply bracket connector (B).
5.
Remove three screws (C) that attach the power supply bracket; remove the power supply bracket.
6.
Remove the screw (D), and disconnect all the connectors from the LVPS.
7.
Remove three metal screws (E) and 3 plastic screws (F) that attach the LVPS with the cage; remove
the LVPS with the cage.
A
B
D
C
C
E
F
F