Lexmark X502n Service Manual - Page 47

7100-XXX Message Description Action Toner Error install Supported Cartridge An invalid toner cartridge is installed. install a supported cartridge. If the problem persists, see "Missing toner cartridge service check" on page 2-32. Missing install Toner (C,M,Y,K) A toner cartridge is not keyed properly. install proper brand of toner cartridge. If problem persists, see "Missing toner cartridge service check" on page 2-32. Missing install OPC Belt The OPC belt cartridge is not installed. Correctly install the photodeveloper cartridge to clear message and continue printing. If error persists, see "Missing photodeveloper cartridge service check" on page 2-33. Missing install Transfer Roller The transfer roller is not installed. Ensure transfer roller is properly installed. If problem persists, see "Transfer roller missing service check" on page 2-34. Paper Jam A 1-2 Paper is jamming at feeding area. See "Paper Jam A1, rear (tray 1)" on page 3-24 or "Paper Jam A2, rear (tray 2)" on page 3-26 for instructions to clear the jam. Paper Jam B Paper is jamming inside the MFP. See "Paper Jam B rear" on page 3-27 for instructions to clear the jam. Paper Jam C Paper is jamming at paper See "Paper Jam C rear" on page 3-29 for exit area. instructions to clear the jam. Cover Open Close (Front, Rear, OPC) The back, front, or OPC cover is open. Close specified cover if open. If not open, open the cover and close. If the problem persists, see "Cover open service check" on page 2-35. TR Belt Life Replace Transfer Belt The transfer belt is at its end of life. Replace the transfer belt. See "Transfer belt unit removal" on page 4-5. TR Kit Life Replace PQ Kit The transfer roll and transfer belt cleaning roll have reached the end of life. Replace the transfer roll. See "Transfer roller removal" on page 4-6. Also, replace the transfer belt cleaning roller. See "Transfer belt cleaning roller removal" on page 4-4. PF1 Kit Life Replace PF Kit 1 The paperfeed roll and Replace the paperfeed roll and the separator pad separator pad in tray 1 are for the respective paper tray (1 or 2). See "Paper at the end of life. feed roller removal" on page 4-32. PF2 Kit Life Replace PF Kit 2 The paperfeed roll and separator pad in tray 2 are at the end of life. ADF Jam A sheet of paper is jammed in the ADF. Open ADF cover and Clear Jam Clear the ADF jam. If the message persists, see "ADF streak service check" on page 2-41. ADF Cover Open Close ADF cover The ADF cover is open. Close the ADF cover. If the cover is already closed, see "ADF streak service check" on page 2-41. Scan Calibration Error Scanner is out of calibration. Perform scanner calibration. Scan Lock Error Unlock Scanner The scanner lock is in the Unlock the scanner. If the scanner lock is in the locked position. unlocked position, see "Flatbed service check" on page 2-41. Diagnostic information 2-9