Lexmark X502n Service Manual - Page 27

7100-XXX Print engine paper and media specifications Print area The printable area is up to 4.0 mm (0.158 in) from the top and bottom of the media, and up to 3.0 mm (0.118 in) from the left and right edges. Any information placed outside this specified printable area will not print. For envelopes, the printable area is up to 4.0 mm (0.158 in) of the left and right edges, and 3.0 mm (0.118 in) of the top and bottom edges. Print engine input and output configurations The following table shows the standard number of input sources and output destinations, as well as the estimated capacity of each. Capacity may vary and is subject to media specifications and MFP operating environment. The capacities listed are based on plain paper at 75 g/m2. Sources and capacities X500n / X502n Input sources Number of standard sources 1 Number of optional input drawers 1 Maximum number of input sources1 2 Maximum input capacity 780 Input capacities2 Standard input Primary tray capacity 250 Total standard capacity 250 Optional input Optional tray 1 capacity 250 Optional tray 2 capacity 530 Output destinations Number of standard destinations 1 Output capacities Standard output bin capacity (top) Media up to 20 lb paper 250 1Optional input drawer is a 530-sheet capacity drawer. Only one optional drawer may be installed at any time. 2The MFP supports top output (facedown) as standard. No additional output options are available. Note: All capacities are based on use of 20 lb paper. General information 1-7