Lexmark X502n Service Manual - Page 26

7100-XXX Print engine specifications Print engine resolution 600 x 600 dpi, 1200 x 600 dpi Color balance settings This MFP offers color balance control. It is a color correction option that allows you to increase or decrease the amount of toner going to the page for all four color planes. The scale ranges from -10 to +10. Emulations Raster Graphics (CMYK bi-tone JBIG Compressed) Print engine speed and performance Media size Letter A4 Legal Transparencies Thick card stock Labels (letter & A4) Medium thick card stock (letter & A4) Envelopes Pages/minute) Standard tray Mono Color Up to 31 Up to 8 Up to 31 Up to 8 Up to 16 Up to 8 Up to 3 Up to 2 Up to 3 Up to 2 Up to 5 Up to 3 Up to 4 Up to 3 Up to 5 Up to 3 Print engine time to first print Media type/Media size First print time Mono Color Plain paper mode / A4, letter 13 seconds 19 seconds Transparency mode / A4, letter 23 seconds 29 seconds Label-middle thickness stock / A4, letter 17 seconds 23 seconds Middle thick stock-glossy / A4, letter 16 seconds 22 seconds Thick stock / A4, letter 23 seconds 29 seconds Envelope (1) mode / Commercial #10, International DL 18 seconds 24 seconds Envelope (2) mode / Commercial #10, International DL 23 seconds 29 seconds Note: Note: Time to first page (TTFP) is the time from the moment when the host sends the print signal until the moment the trailing edge of the first page leaves the exit feed rollers. TTFP is measured using a simple text (single character) page. Note: Note: Warm up time, 60 seconds maximum, is the time elapsed from when the power is turned on to when the Ready status is reached. 1-6 Service Manual