Linksys QuickVPN Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN A - Page 130
Configuring DSCP, QoS > DSCP Setup, Queue, Restore Defaults
UPC - 745883566341
View all Linksys QuickVPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the QoS Settings STEP 3 Click Save. 5 Configuring DSCP The QoS > DSCP Setup window displays the settings for configuring DSCP as the trust mode for QoS for each LAN port. To configure DSCP setup settings, follow these steps: STEP 1 Click QoS > DSCP Setup. STEP 2 Configure the DSCP setup settings for the router: • DSCP-The Differentiated Services Code Point value in the incoming packet. • Queue-Select the traffic forwarding queue, 1 to 4, to which the DSCP priority is mapped. • Restore Defaults-Click this button to restore the default DSCP values. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 130
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the QoS Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
130
5
STEP 3
Click
Save
.
Configuring DSCP
The QoS > DSCP Setup window displays the settings for configuring DSCP as the
trust mode for QoS for each LAN port.
To configure DSCP setup settings, follow these steps:
STEP 1
Click
QoS > DSCP Setup
.
STEP 2
Configure the DSCP setup settings for the router:
•
DSCP
—
The Differentiated Services Code Point value in the incoming
packet.
•
Queue
—
Select the traffic forwarding queue, 1 to 4, to which the DSCP
priority is mapped.
•
Restore Defaults
—
Click this button to restore the default DSCP values.