Linksys QuickVPN Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN A - Page 97
Configuring Basic Settings, Firewall > Basic Settings, Firewall, Enable, DoS Protection
UPC - 745883566341
View all Linksys QuickVPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring Firewall Settings 5 Configuring Basic Settings The Firewall > Basic Settings window displays the firewall-specific settings of the router. To configure basic firewall settings for the router, follow these steps: STEP 1 Click Firewall > Basic Settings. STEP 2 Configure the basic firewall settings: • Firewall-Enable this feature to perform deep packet inspection on all the traffic going through the router and drop the packets that do not follow the pre-defined protocol behavior. The default is Enable. • DoS Protection-When enabled, the router prevents DoS (Denial of Service) attacks coming in from the Internet. DoS attacks consume most of the router's resources and as a result they can prevent legitimate traffic from passing through the router. The default Is Enable. • Block WAN Request-When enabled, the router ignores PING Request from the Internet so it seems to be hidden. The default is Enable. • Remote Management-When enabled, the router allows the web-based utility to be accessed from the Internet. The default is Disable. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 97