Linksys QuickVPN Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN A - Page 160

Setting Up and Configuring the WRVS4400N Wireless-N Router Viewing Status 5 • Force Version-The default protocol version to use. Select Normal (uses RSTP) or Compatible (compatible with old STP). The default is Normal. • Protocol Enable-Check this box to enable RSTP on the associated port. The default is unchecked (RSTP disabled). • Edge-Check this box to specify that the associated port is an edge port (end station). Uncheck the box to specify that the associated port is a link (bridge) to another STP device. The default is checked (edge port). • Path Cost-The RSTP path cost for the designated ports. Enter a number from 1 to 200000000, or auto (autogenerated path cost). The default is auto. Viewing Status The Status window allows you to view the current status on this router: • "Viewing WAN/Gateway Status" on page 161 • "Viewing Local Network Status" on page 163 • "Viewing Wireless LAN Status" on page 165 • "Viewing System Performance" on page 166 Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 160