Linksys QuickVPN Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN A - Page 169
Running the VPN Router Software Wizard, Firewall > Basic Settings, Save Settings, VPN > Summary - rvs4000 download
UPC - 745883566341
View all Linksys QuickVPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Using the VPN Setup Wizard Running the VPN Router Software Wizard 6 STEP 1 Click Firewall > Basic Settings. STEP 2 Enable Remote Management and enter 8080 in the Port field. Please note that you cannot enter any other value if you want to use the VPN Wizard. Also, make sure that HTTPS has been selected. STEP 3 Click Save Settings. STEP 4 Click VPN > Summary and make sure the Tunnel(s) available are not zero. STEP 5 Ensure that the LAN IP addresses of routers with VPN are in different subnets in order for the VPN connection to work. NOTE The VPN Setup Wizard assumes that no firewall/NAT device sits in front of the VPN router. Running the VPN Router Software Wizard STEP 1 Access the VPN Setup Wizard in one of two ways: • If you have an RVS4000, WRVS4400N v1.1, or WRVS4400N v2 Installation CD-ROM, insert it into your CD-ROM drive. • Download the VPN Setup Wizard from the Cisco Support site for your router. STEP 2 Go to the Start menu and click Run. In the field provided, enter D:\VPN Setup Wizard.exe STEP 3 The Welcome window appears. Click the Click Here to Start button. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 169