Linksys QuickVPN Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN A - Page 135
Setting Up and Configuring the WRVS4400N Wireless-N Router, Level, Severity Name, Description
UPC - 745883566341
View all Linksys QuickVPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the Administration Settings 5 To configure System Logs for the router, follow these steps: STEP 1 Click Administration > Log. STEP 2 Configure the system logs for the router: • Log Setting - Log Level-Select the log levels that the router should record. Level Severity Name 7 LOG_DEBUG 6 LOG_INFO 5 LOG_NOTICE 4 LOG_WARNING 3 LOG_ERR 2 LOG_CRIT 1 LOG_ALERT 0 LOG_EMERG Description Debug-level message Information messages only Normal but significant condition Warning conditions Error conditions Critical conditions Immediate action needed System unusable - Outgoing Log-Select Enable to cause all outgoing packets to be logged. You can then click View Outgoing Table to display information on the outgoing packets including Source IP, Destination IP, and Service/Port number. - Incoming Log-Select Enable to cause all incoming packets to be logged. You can then click View Incoming Table to display information on incoming packets including Source IP, Destination IP, and Service/Port number. • Email Alerts - Email Alerts-If enabled, an e-mail is sent when the number of DoS events exceeds the defined threshold or the total events number exceed 100. If enabled, you must provide the e-mail address information. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 135