Linksys QuickVPN Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN A - Page 197
I need to use port triggering., admin, Firewall > Port Range Triggering, Enabled, Save Settings
UPC - 745883566341
View all Linksys QuickVPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Troubleshooting A I need to use port triggering. Port triggering looks at the outgoing port services used and will trigger the router to open a specific port, depending on which port an Internet application uses. Follow these steps: STEP 1 To connect to the router, go to the web browser, and enter http://192.168.1.1 or the IP address of the router. STEP 2 Enter the password, if asked (the default password is admin). STEP 3 Click Firewall > Port Range Triggering. STEP 4 Enter any name you want to use for the Application Name. STEP 5 Enter the Start and End Ports of the Triggered Range. Check with your Internet application provider for more information on which outgoing port services it is using. STEP 6 Enter the Start and End Ports of the Forwarded Range. Check with your Internet application provider for more information on which incoming port services are required by the Internet application. STEP 7 Check the Enabled checkbox for the entry. STEP 8 When you have completed the configuration, click Save Settings. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 197