Linksys QuickVPN Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN A - Page 173
Router 1 User Name, Router 1 Password, Tunnel Name, Pre-shared Key, Router 2 WAN IP address
UPC - 745883566341
View all Linksys QuickVPN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Using the VPN Setup Wizard Running the VPN Router Software Wizard Configure VPN Tunnel 6 • Router 1 User Name: Enter the user name of the Router 1. • Router 1 Password: Enter the password of the Router 1. • Router 2 User Name: Enter the user name of the Router 2. • Router 2 Password: Enter the password of the Router 2. • Tunnel Name: Enter a name for this tunnel. • Pre-shared Key: IKE uses the Pre-shared Key field to authenticate the remote IKE peer. Both character and hexadecimal values are acceptable in this field; e.g.,"My_@123" or "0x4d795f40313233". Note that both sides must use the same Pre-shared Key. • Router 2 WAN IP address: Enter the WAN IP address of Router 2. • Router 2 IP by DNS Resolved: Enter the DDNS Domain Name of Router 2 if it does not have a static IP address for its internet connection. STEP 7 The router configuration is checked. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 173