MSI rc410M2 User Guide - Page 55
BIOS Setup, IDE Device Configuration, On-Chip IDE Controller, PCI IDE BusMaster, I/O Device
View all MSI rc410M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
BIOS Setup IDE Device Configuration Press to enter the sub-menu and the following screen appears: On-Chip IDE Controller The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select [Disabled] to disable the integrated IDE controller, [Primary] to enable only the primary IDE controller, [Secondary] to enable only the secondary IDE controller, or [Both] to enable both IDE controllers. Setting options: [Disabled], [Primary], [Secondary], [Both]. PCI IDE BusMaster Set this option to [Enabled] to specify that the IDE controller on the PCI local bus has bus mastering capability. Settings options: [Disabled], [Enabled]. I/O Device Configuration Press to enter the sub-menu and the following screen appears: COM Port 1 Select an address and corresponding interrupt for Serial Port 1. The settings are: [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4], [2F8/IRQ3], [Disabled]. Parallel Port This specifies the I/O port address and IRQ of the onboard parallel port. 3-15