Marantz AV8003 AV8003 User Manua - Page 38

NAMES AND FUNCTION CONNECTIONS SETUP BASIC OPERATION 5 PREFERENCE • ZONE SETUP : "5-1 ZONE SETUP" (see page 36) • DC TRIGGER SETUP : "5-2 DC TRIGGER SETUP" (see page 36) 1. Select "5. PREFERENCE" from MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button. 5.PREFERENCE ZONE SETUP A B DC TRIGGER SETUP 1 2 STANDBY : AUDIO : HDMI AUDIO: HDMI LIP : P.AMP LINK: NORMAL MAIN ENABLE DISABLE ENABLE RETURN NEXT EXIT 2. Select the desired menu with the 3 or 4 cursor buttons and press the ENTER button. STAND BY: When this is set to "ECONOMY", you can reduce the power consumption when the unit is in the Standby mode. When "ECONOMY" is selected, "TV AUTO" and "RS-232C" are disabled when the unit is in the Standby mode. AUDIO: In the Audio mode, Dolby Digital and DTS output is set to either "MAIN" or "SUB". Select "AUDIO" with the 1 or 2 cursor buttons, then select MAIN ↔ SUB ↔ MAIN+SUB with the 1 or 2 cursor buttons. HDMI AUDIO: This setting determines whether to play back audio input to the HDMI jacks through the unit or output it through the unit to a TV or projector. ENABLE: The audio input to the HDMI jacks can be played back by this unit. In such case, audio signals are not output to the TV or projector. THROUGH: The audio input to the HDMI jacks is not output from the speaker terminals of the unit. Audio data is output directly to the TV or projector. This setting is used to listen to audio on a multi channel TV, etc. HDMI LIP (Auto Lipsync Correction): Video signals may take longer to process than audio signals depending on the connected video equipment. When the unit is connected to TV or Projector supporting Auto Lipsync Correction in HDMI 1.3a, audio and video can be automatically synchronized using this function. Use the 1 or 2 cursor buttons to switch between ENABLE and DISABLE. ENABLE: Auto Lipsync Correction is used to synchronize audio and video. DIESABLE: Deactivates this function. Note: • This function is not available when the unit is connected to equipment that does not support HDMI 1.3a or Auto Lipsync Correction. For details, check the user's manual of the connected equipment. • If this function is unavailable, you can use the regular Lipsync function to synchronize audio and video. (See page 47) P.AMP LINK: ENABLE: Set when performing REMOTE CONTROL connection with MM8003. DISABLE: Set when performing REMOTE CONTROL connection with a MARANTZ power amp other than MM8003. After you complete this portion of the setup, move the cursor to "RETURN" with the 3, 4 cursor buttons and press the ENTER button. 5.PREFERENCE ZONE SETUP A B DC TRIGGER SETUP 1 2 STANDBY : AUDIO : HDMI AUDIO: HDMI LIP : P.AMP LINK: NORMAL MAIN ENABLE DISABLE ENABLE RETURN NEXT EXIT DC TRIGGER SETUP DC TRIG-1:DISABLE TV : DVD : VCR1 : DSS : NET : TAPE : CD/R : AUX : TUNER : 7.1CH : RETURN BACK EXIT ZONE SETUP A VIDEO :DVD AUDIO :DVD SLEEP :OFF MONO/ST:STEREO OSD INFO:ENABLE ZONE:OFF SPKR: VOL :VARI VOL : LEV :-90dB LEV : RETURN BACK EXIT DC TRIGGER SETUP DC TRIG-2:DISABLE TV : DVD : VCR1 : DSS : NET : TAPE : CD/R : AUX : TUNER : 7.1CH : RETURN BACK EXIT ZONE SETUP B AUDIO :DVD SLEEP :OFF MONO/ST:STEREO ZONE:OFF SPKR: VOL :VARI VOL : LEV :-90dB LEV : RETURN BACK EXIT ENGLISH ADVANCED OPERATION REMOTE CONTROLLER TROUBLESHOOTING OTHERS 35