Marantz AV8003 AV8003 User Manua - Page 39

NAMES AND FUNCTION CONNECTIONS SETUP BASIC OPERATION ENGLISH 5-1 ZONE SETUP The AV8003 has source selectors, sleep timers and zonespeaker output remote controller for the two other ZONEs in the zone system. These features can be set from this menu. 1. Select "5. PREFERENCE" from the MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button. 2. Select "ZONE SETUP" with the 3 or 4 cursor buttons and select either "ZONE A" or "ZONE B" with the 1 or 2 cursor buttons. 3. Press the ENTER button to enter the setting. The following explanation shows how to operate ZONE A of the zone system. The ZONE B setting does not have the VIDEO FUNCTION. ZONE SETUP A VIDEO :DVD AUDIO :DVD SLEEP :OFF MONO/ST:STEREO OSD INFO:ENABLE ZONE:OFF SPKR: VOL :VARI VOL : LEV :-90dB LEV : RETURN BACK EXIT 4. Select the desired item with the 3 or 4 cursor button. VIDEO: Select the video source of the zone output with the 1 or 2 cursor buttons. AUDIO: Select the audio source of the zone output with the 1 or 2 cursor buttons. SLEEP: The sleep mode is available when the zone is active, set the time with 1 or 2 cursor buttons. The sleep timer can be set to a maximum 120 minutes in 10 minute increments. MONO/ST: This mode switches audio output to the zone system between MONAURAL and STEREO, using the 1 and 2 cursor buttons. OSD INFO: With this function, on-screen display information is shown on connected TVs or other devices when you switch input functions. Select "ENABLE" with the 1 or 2 cursor buttons to enable OSD INFO or "DISABLE" to disable it. Select "DISABLE" if this function is not needed. ZONE: Switch the zone output "ON" or "OFF" with the 1 or 2 cursor buttons. SPKR (ZONE SPEAKER): Switch the speaker output "ON" or "OFF" with the 1 or 2 cursor buttons. VOL (VOLUME SETUP): Select whether the zone or zone speaker output level is variable or fixed with the 1 or 2 cursor buttons. LEVEL (VOLUME LEVEL): Adjust the zone output level with the 1 or 2 cursor buttons. The volume can be set between -90 dB and 0 dB in 1 dB increments. Note: • SPKR setting can be changed when the SURR B is set to "NONE" in the SPEAKER SIZE menu and "SPEAKER C" is in the OFF position on the rear panel. When this setting is unavailable, "***" is displayed. • If "VOLUME" is set to "FIXED", the zone output level cannot be adjusted from the A or B ZONE. • SPKR cannot be on for both ZONE A and ZONE B at the same time. After you complete this portion of the setup, move the cursor to "RETURN" with the 3 or 4 cursor buttons and press the ENTER button. 5-2 DC TRIGGER SETUP This unit has 2 DC trigger control jacks, which can be used to link with input functions for the main zone or zone. Each trigger can be setup separately. 1. Select "5. PREFERENCE" from MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button. 2. Select "DC TRIGGER SETUP 1or 2" with the 3, 4, 1 and 2 cursor buttons. 3. Press the ENTER button to enter the selection. DC TRIGGER SETUP DC TRIG-1:DISABLE TV : DVD : VCR1 : DSS : NET : TAPE : CD/R : AUX : TUNER : 7.1CH : RETURN NEXT EXIT 4. You can select "MAIN ZONE", "ZONE A", "ZONE B", "REMOTE" or "DISABLE" with the 1 or 2 cursor buttons. Note: • REMOTE is available for the external control. The RC2001 cannot operate the function. 5. Select desired input source with the 3 or 4 cursor buttons. 6. Set to "ON" or "OFF" with the 1 or 2 cursor buttons. 7. After you complete this portion of the setup, move the cursor to "RETURN" with the 3 or 4 cursor button and press the ENTER button. Note: • When an input source that is on in the set ZONE is selected, voltage is output to the DC TRIGGER output terminal. ADVANCED OPERATION REMOTE CONTROLLER TROUBLESHOOTING OTHERS 36