Maytag MEDB800VQ Use and Care Guide - Page 26

Delicate Use this cycle to get extra-low knit fabrics. heat to gently dry items such as lingerie, blouses, or washable Sensor Preset Cycle Settings Sensor Cycles Load Type BULKY Jackets, comforters, pillows HEAVY DUTY Heavyweight mixed loads, cottons, jeans NORMAL Corduroys, work clothes, sheets WRINKLE CONTROL Business casual clothes, permanent press, synthetics DELICATE I.ingerie, blouses, washable knit fabrics Temperature Medium Regular* Medium heat is se[ectab[e as an alternate temperature. Medium* I.ow heat is se[ectab[e as an alternate temperature. Low* Extra-low heat is se[ectab[e as an alternate temperature. Extra-Low *Preferred setting Steam Cycles Use Steam Cycles to help smooth out wrinkles from dry items, such as clothes that have been worn or clothes that have been [eft in the dryer too long. When a Steam Cycle is selected, the estimated time remaining display shows the actual time remaining in the cycle. NOTE: Results may vary depending on fabric. 100% cotton garments with wrinkle-free finish may yield better results than those without. Use of a fabric softener sheet is not recommended temporary staining on the clothes. with steam cycles as it may cause Rapid Refresh Small Load This cycle is best for smoothing out wrinkles and reducing odors from loads consisting of one to four dry items of wrinkle-free cotton, cotton-polyester blend, common knits, and synthetic garments. In this cycle, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief coo[ down. The heat [eve[ and cycle time are not adjustable. Custom Refresh This cycle is best for touching up clothes that have been [eft in the dryer too long. In this cycle, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief coo[ down. The dry time and temperature can be adjusted for this cycle. NOTE: Overloading the dryer may not yield the same results. Steam Preset Cycle Settings Timed Cycles Load Type RAPID REFRESH Small Load CUSTOM REFRESH Default Temperature* Medium Medium Default Time (Minutes)* 15 20 *Temp I_eve[ and Time Adjust are se[ectab[e only for the Custom Refresh cycle. NOTE:The Custom Refresh cycle has a minimum dry time of 15 minutes and a maximum dry time of 40 minutes. Only the Medium and Regular temperature settings can be used for the Custom Refresh cycle. Timed Cycles Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing TIME ADJUST + (plus) or - (minus). See "Changing Cycles, Modifiers, and Options." NOTE: Timed Cycles may also be used with the drying rack. See "Drying Rack Option." Timed Dry Use this cycle to complete drying if items are still damp after a Sensor Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads, and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting. Timed Dry can also be used with the drying rack. Rapid Dry Use this cycle for dying small loads that need short drying time. Timed Preset Cycle Settings Timed Cycles Load Type Default Temperature TIMED DRY Heavyweight, clothes bulky items, work High RAPID DRY Small loads Regular Default Time (Minutes) 4O 23