Miele CM 7750 CoffeeSelect Operating instructions/Installation instructions - Page 70

Cleaning the drip tray and grounds container, coffee machine.

Page 70 highlights

Cleaning and care Cleaning the drip tray and grounds container  Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. If the pipework has just been rinsed, wait a while before removing the drip tray. Please be aware that water in the drip tray can also be very hot. Do not touch hot components. Clean the drip tray and grounds container every day to avoid unpleasant smells and mildew. The grounds container is located in the drip tray. Water from rinsing also collects in the grounds container. A prompt will appear in the display when the drip tray and/or the grounds container is full and needs to be emptied. Empty the drip tray and the grounds container. Remove the drip tray and the grounds container while the coffee machine is switched on. Otherwise, the message Empty the drip tray and the waste container will appear in the display, even though the drip tray and/or the grounds container are not filled to the maximum level.  Pull the drip tray carefully out of the coffee machine. 70  Empty the drip tray and grounds container.  Remove the drip tray cover , the drip tray , and the lower panel . Clean the lower panel by hand only using warm water and liquid dish soap. All other parts are dishwasher-safe.  Clean all parts thoroughly.  Clean the contacts (metal discs) and the space between them carefully. Dry everything thoroughly. The contacts will not be able to detect that the drip tray is full if they are damp or dirty. Check the contacts and the area around them once a week.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

Cleaning and care
70
Cleaning the drip tray and
grounds container
Danger of burning and scalding
on hot components or by hot liquids.
Components can become very hot
during operation. Touching hot
components can cause burning. The
liquids and steam dispensed are very
hot and can cause scalding.
If the pipework has just been rinsed,
wait a while before removing the drip
tray.
Please be aware that water in the
drip tray can also be very hot.
Do not touch hot components.
Clean the drip tray and grounds
container
every day
to avoid
unpleasant smells and mildew.
The grounds container is located in the
drip tray. Water from rinsing also
collects in the grounds container.
A prompt will appear in the display
when the drip tray and/or the grounds
container is full and needs to be
emptied. Empty the drip tray
and
the
grounds container.
Remove the drip tray and the grounds
container while the coffee machine is
switched on. Otherwise, the message
Empty the drip tray and the waste
container
will appear in the display,
even though the drip tray and/or the
grounds container are not filled to the
maximum level.
Pull the drip tray carefully out of the
coffee machine.
Empty the drip tray
and
grounds
container.
Remove the drip tray cover 
, the
drip tray 
, and the lower panel 
.
Clean the lower panel by hand only
using warm water and liquid dish
soap.
All other parts are dishwasher-safe.
Clean all parts thoroughly.
Clean the contacts (metal discs) and
the space between them carefully.
Dry everything thoroughly.
The contacts will not be able to detect
that the drip tray is full if they are
damp or dirty.
Check the contacts and the area
around them once a week.