Miele CM 7750 CoffeeSelect Operating instructions/Installation instructions - Page 74

Reassembling the main dispenser, Removing and cleaning the cup sensor

Page 74 highlights

Cleaning and care  Clean the surfaces of the main dispenser with a damp cloth. If the milk pipe connecting pieces are blocked, clean them under running water with the brush supplied:  Insert the brush into the pipe connecting piece. Move it back and forth until all milk residue has been removed. If you have released the connecting piece from the milk pipe: when reassembling, ensure that the smaller, thinner end of the connecting piece is pushed into the hose. Reassembling the main dispenser The dispensing unit is easier to reassemble if the individual parts are dampened with water beforehand.  Reassemble the dispensing unit. Push the dispensing spouts  firmly back onto the dispensing unit. Make sure that all parts are tightly connected to one another.  Push the dispensing unit back into the main dispenser and replace the stainless steel cover.  Tap OK. Tip: If the coffee machine is switched off, the main dispenser components can be removed and cleaned at any time. Removing and cleaning the cup sensor The cup sensor is located under the main dispenser. Clean the cup sensor daily by hand with warm water and a little liquid dish soap.  Press the two catches together (see arrows). 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

Cleaning and care
74
Clean the surfaces of the main
dispenser with a damp cloth.
If the milk pipe connecting pieces are
blocked, clean them under running
water with the brush supplied:
Insert the brush into the pipe
connecting piece. Move it back and
forth until all milk residue has been
removed.
If you have released the connecting
piece from the milk pipe: when
reassembling, ensure that the smaller,
thinner end of the connecting piece is
pushed into the hose.
Reassembling the main dispenser
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Reassemble the dispensing unit.
Push the dispensing spouts 
firmly
back onto the dispensing unit.
Make sure that all parts are tightly
connected to one another.
Push the dispensing unit back into
the main dispenser and replace the
stainless steel cover.
Tap 
OK
.
Tip:
If the coffee machine is switched
off, the main dispenser components
can be removed and cleaned at any
time.
Removing and cleaning the
cup sensor
The cup sensor is located under the
main dispenser.
Clean the cup sensor daily by hand with
warm water and a little liquid dish soap.
Press the two catches together (see
arrows).