Miele CM 7750 CoffeeSelect Operating instructions/Installation instructions - Page 93

Problem, Possible cause and solution, F355, F357- F362, switching off the fuse.

Page 93 highlights

Problem F233 F355, F357- F362 Frequently Asked Questions Possible cause and solution The cup sensor is not inserted or is incorrectly inserted. The stainless steel cover of the main dispenser was not installed properly, e.g. is tilting forwards slightly. If the main dispenser is moving upwards and the cup sensor is bumped, e.g. with a cup, the cup sensor loses its reference position.  Confirm the message with OK.  Switch the coffee machine off with the On/Off button . Wait for at least 30 minutes before switching the machine back on again. Or disconnect the appliance from the electricity supply by removing the plug from the socket or switching off the fuse.  Refit the cup sensor.  Refit the stainless steel cover. Make sure the cover is installed correctly. The bean system must be set up again, e.g. coffee beans have possibly got jammed.  Switch the coffee machine off with the On/Off button . Wait for 30 minutes before switching the machine back on again. 93

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112

Frequently Asked Questions
Problem
Possible cause and solution
F233
The cup sensor is not inserted or is incorrectly
inserted.
The stainless steel cover of the main dispenser was
not installed properly, e.g. is tilting forwards slightly.
If the main dispenser is moving upwards and the cup
sensor is bumped, e.g. with a cup, the cup sensor
loses its reference position.
Confirm the message with 
OK
.
Switch the coffee machine off with the On/Off
button 
. Wait for at least 30 minutes before
switching the machine back on again. Or
disconnect the appliance from the electricity
supply by removing the plug from the socket or
switching off the fuse.
Refit the cup sensor.
Refit the stainless steel cover. Make sure the cover
is installed correctly.
F355, F357– F362
The bean system must be set up again, e.g. coffee
beans have possibly got jammed.
Switch the coffee machine off with the On/Off
button 
. Wait for 30 minutes before switching
the machine back on again.
93