NEC V754Q Users Manual - English - Page 16
²perating Range for the Remote, Control
View all NEC V754Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
IMAGE FLIP Button Toggle switches between [H FLIP], [V FLIP], [180° ROTATE] and [NONE]. See page 35. ACTIVE PICTURE Button Selects active picture. MULTI PICTURE Button ON/OFF Button: Toggle switches between ON and OFF. MODE Button: Selects a mode from PIP (picture in picture) or PBP (picture by picture). CHANGE Button: Swaps images between two pictures. PICTURE ASPECT Button: Selects active picture frame aspect. NOTE: Enable to change each multi picture size by pressing SET/POINT ZOOM button during multi picture mode. REMOTE ID Button Activates the REMOTE ID function. See page 47. MTS Button*1 *1: This button's action depends on which Option Board you are using. Refer to the Option Board's user's manual for further information. NOTE: The buttons with no explanation do not function. Operating Range for the Remote Control Point the top of the remote control toward the monitor's remote control sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.) from the remote control sensor, or at a horizontal and vertical angle of within 30° and within a distance of about 3.5 m (10 ft.). Caution: The remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor, or when there is an object in the path. Handling the remote control • Do not expose to strong shock. • Do not allow water or other liquid to splash on the remote control. If the remote control gets wet, wipe it dry immediately. • Avoid exposure to heat and steam. • Except to install the batteries, do not open the remote control. English-14