NEC V754Q Users Manual - English - Page 44

CHANGE PASSWORD SECURITY PASSWORD SECURE MODE OFF START-UP LOCK CONTROL LOCK BOTH LOCK IR LOCK SETTINGS MODE SELECT UNLOCK ALL LOCK CUSTOM LOCK KEY LOCK SETTINGS MODE SELECT UNLOCK ALL LOCK CUSTOM LOCK DDC/CI DisplayPort2 input only PING IP ADDRESS EXECUTE IP ADDRESS RESET Allows the security password to be changed. The factory preset password is 0000. Input security password. The security password is not required when the monitor power is on. The security password is required when the monitor power is on. The security password is required when a remote control button or a control button on the monitor is pressed. The security password is required when either the monitor is powered on, or a remote control button or a control button on the monitor is pressed. Prevents the monitor from being controlled by the wireless remote control. When ACTIVATE is selected, all settings are activated. NOTE: IR LOCK SETTINGS is a function intended only for the wireless remote control buttons. This function does not lock out access to the buttons on the monitor. To return to normal operation, press the "DISPLAY" button on the remote control and hold it down for more than 5 seconds. Selects the mode UNLOCK, ALL LOCK or CUSTOM LOCK. All buttons on the remote control are available for normal operation. Locks all remote control buttons. Selects which buttons to be locked from POWER, VOLUME, and INPUT button. Except for CUSTOM LOCK settings, other buttons on the remote control are locked. POWER: When LOCK is selected, the POWER button is locked. VOLUME: When UNLOCK is selected, set the minimum and maximum volume between VOL.0 to VOL.100. VOLUME (+) button and VOLUME (-) buttons are only available from the minimum volume to the maximum volume you set. When LOCK is selected, VOLUME (+) button and VOLUME (-) buttons are locked. INPUT: When UNLOCK is selected, choose up to three buttons from DisplayPort1, DisplayPort2, HDMI1, HDMI2, HDMI3, MEDIA PLAYER, OPTION which you prefer to be unlocked. The unselected buttons are locked. When LOCK is selected, all INPUT buttons are locked. CHANNEL: To lock channel buttons on the remote control, select it to LOCK then press ACTIVE, channel CH/ZOOM (+) button and (-) button are locked. Prevents the monitor from being controlled by the buttons on the monitor. When ACTIVATE is selected all of the settings are activated. NOTE: KEY LOCK SETTINGS is a function intended only for the buttons of the monitor. This function does not lock out access to all buttons on the remote control. To activate the control key lock function, press the UP button ( ) and the DOWN button ( ) and hold down simultaneously for more than 3 seconds. To resume user mode, press the UP button ( ) and the DOWN button ( ) and hold simultaneously for more than 3 seconds. Selects the mode UNLOCK, ALL LOCK or CUSTOM LOCK. All buttons are available for normal operations. Locks all remote control buttons. Selects which buttons to be locked from POWER, VOLUME, and INPUT button. Except for CUSTOM LOCK settings, other buttons on the remote control are locked. POWER: When LOCK is selected, the POWER button is locked. VOLUME: When UNLOCK is selected, set the minimum and maximum volume between VOL.0 to VOL.100. The PLUS button (+) and the MINUS button (-) are only available from the minimum volume to the maximum volume you set. When LOCK is selected, the PLUS button (+) and the MINUS button (-) are locked. INPUT: When UNLOCK is selected, the INPUT/SET button is unlocked. CHANNEL: To lock channel buttons on the remote control, select it to LOCK then press ACTIVE, the UP button ( ) and the DOWN button ( ) are locked. ENABLE/DISABLE: Turns ON or OFF the two-way communication and control of the monitor. Confirm successful connection with the network by communicating with a preset IP address. Sets an IP ADDRESS for sending PING. Checks a reply can be sent to the monitor or not from the IP ADDRESS by sending PING. Resets IP ADDRESS SETTINGS back to factory settings. English-42