NEC VT695 VT49/490/491/590/595/695 UM - Page 27
Connecting the Supplied Power Cable
UPC - 050927253607
View all NEC VT695 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2. Installation and Connections Connecting the Supplied Power Cable Connect the supplied power cable to the projector. First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet. POWERSTATUSLAMP ON/STAND BY SOURCE AUTO ADJ. ENTER SELECT EXIT MENU ZOOM FOCUS To wall outlet ← Make sure that the prongs are fully inserted into both the AC IN and the wall outlet. CAUTION: Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off. CAUTION: Do not turn off the AC power by pressing the main power switch or by unplugging the power cable when the projector is powered on. Doing so can cause damage to the projector. TIP: The projector can be turned off (by either the main power switch or by unplugging the power cable) during its cool down period after it is turned off using the remote control or via the power button on the control panel. 19