NEC VT695 VT49/490/491/590/595/695 UM - Page 53
[Installation], Using On-Screen Menu
UPC - 050927253607
View all NEC VT695 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
[Installation] 5. Using On-Screen Menu Selecting Projector Orientation [Orientation] This sets your image for your type of projection application. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. Desktop front Ceiling rear Desktop rear Ceiling front Selecting Communication Speed [Communication Speed] This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin). It supports data rates from 4800 to 19200 bps. The default is 19200 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs). Your selected communication speed will not be affected even when [Reset] is done from the menu. Disabling the Cabinet Buttons [Control Panel Lock] This option turns on or off the Key Lock function for cabinet buttons. NOTE: • The Control Panel Lock setting will not affect the remote control or PC Control Functions. • When the cabinet buttons are disabled, pressing and holding the EXIT button on the projector cabinet for about 10 seconds will change the setting to enable. • The Key Lock icon will be displayed at the bottom right of the menu when Control Panel Lock is enabled. 45