NEC VT695 VT49/490/491/590/595/695 UM - Page 58

Maintenance, (1) Cleaning or Replacing the Filters - clean filter

Get NEC VT695 - XGA LCD Projector PDF manuals and user guides
UPC - 050927253607
View all NEC VT695 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

AUTO ADJ. SOURCE EXIT ON/STAND BY SELECT ENTER MENU POWESRTATUSLAMP ZOOM FOCUS 6. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters and replace the lamp. ᕡ Cleaning or Replacing the Filters The air-filter sponge keeps dust and dirt from getting inside the projector and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may overheat. CAUTION • Turn off the projector, turn off the main power switch and unplug the projector before replacing the filters. • Only clean the outside of the filter cover with a vacuum cleaner. • Do not attempt to operate the projector without the filter cover. To clean the air-filter: Vacuum the filter-through the filter cover. VT59/VT49 VT695/VT595/VT590/VT490 To replace the filter (sponge): 1. Remove the filter cover by pushing down on the catch of the cover until you feel it detach. NOTE: The VT695/VT595/VT590/VT490 have two filters; the VT59 and VT49 have one filter only. Catch 2. Gently peel off the filter (sponge) and replace it with the new one. 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
50
6. Maintenance
VT695/VT595/VT590/VT490
VT59/VT49
This section describes the simple maintenance procedures you should follow to clean the filters and replace the lamp.
²
Cleaning or Replacing the Filters
The air-filter sponge keeps dust and dirt from getting inside the projector and should be cleaned after every 100 hours
of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may overheat.
CAUTION
•
Turn off the projector, turn off the main power switch and unplug the projector before replacing the filters.
•
Only clean the outside of the filter cover with a vacuum cleaner.
•
Do not attempt to operate the projector without the filter cover.
To clean the air-filter:
Vacuum the filter-through the filter cover.
To replace the filter (sponge):
1.
Remove the filter cover by pushing down on the catch of the cover until you feel it detach.
NOTE: The VT695/VT595/VT590/VT490 have two filters; the VT59 and VT49 have one filter only.
Catch
2.
Gently peel off the filter (sponge) and replace it with the new one.