Netgear AC1900-High User Manual - Page 43

ADVANCED > Setup > LAN Setup, Use Router as DHCP Server

Get Netgear AC1900-High PDF manuals and user guides View all Netgear AC1900-High manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Nighthawk AC1900 WiFi Cable Modem Router  To specify the pool of IP addresses that the modem router assigns: 1. Launch an Internet browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login window opens. 3. Enter the user name and password. The user name is admin. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Setup > LAN Setup. 5. Make sure that the Use Router as DHCP Server check box is selected. 6. Specify the range of IP addresses that the modem router assigns: a. In the Starting IP Address field, type the lowest number in the range. This IP address must be in the same subnet as the modem router. b. In the Ending IP Address field, type the number at the end of the range of IP addresses. This IP address must be in the same subnet as the modem router. 7. Click the Apply button. Your settings are saved. The modem router delivers the following parameters to any LAN device that requests DHCP: • An IP address from the range that you have defined • Subnet mask • Gateway IP address (the modem router's LAN IP address) • DNS server IP address (the modem router's LAN IP address) Specify Network Settings 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
Specify Network Settings
43
Nighthawk AC1900
WiFi
Cable
Modem
Router
To specify the pool of IP addresses that the modem router assigns:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login window opens.
3.
Enter the user name and password.
The user name is
admin
. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select
ADVANCED > Setup > LAN Setup
.
5.
Make sure that the
Use Router as DHCP Server
check box is selected.
6.
Specify the range of IP addresses that the modem router assigns:
a.
In the
Starting IP Address
field, type the lowest number in the range.
This IP address must be in the same subnet as the modem router.
b.
In the
Ending IP Address
field, type the number at the end of the range of IP
addresses.
This IP address must be in the same subnet as the modem router.
7.
Click the
Apply
button.
Your settings are saved.
The modem router delivers the following parameters to any LAN device that requests DHCP:
•
An IP address from the range that you have defined
•
Subnet mask
•
Gateway IP address (the modem router’s LAN IP address)
•
DNS server IP address (the modem router’s LAN IP address)