Netgear AC1900-High User Manual - Page 79
Set Up Port Triggering, Add a Port Triggering Service
![]() |
View all Netgear AC1900-High manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Nighthawk AC1900 WiFi Cable Modem Router • Destination address. The IP address of www.example.com, which is the address of your modem router. • Destination port number. 80, which is the standard port number for a web server process. 2. Your modem router receives the message and finds your port forwarding rule for incoming port 80 traffic. 3. The modem router changes the destination in the message to IP address 192.168.0.123 and sends the message to that computer. 4. Your web server at IP address 192.168.0.123 receives the request and sends a reply message to your modem router. 5. Your modem router performs Network Address Translation (NAT) on the source IP address, and sends the reply through the Internet to the computer or wireless device that sent the web page request. Set Up Port Triggering Port triggering is a dynamic extension of port forwarding that is useful in these cases: • An application must use port forwarding to more than one local computer (but not simultaneously). • An application must open incoming ports that are different from the outgoing port. With port triggering, the modem router monitors traffic to the Internet from an outbound "trigger" port that you specify. For outbound traffic from that port, the modem router saves the IP address of the computer that sent the traffic. The modem router temporarily opens the incoming port or ports that you specify in your rule, and forwards that incoming traffic to that destination. Port forwarding creates a static mapping of a port number or range of ports to a single local computer. Port triggering can dynamically open ports to any computer when needed and close the ports when they are no longer needed. Note: If you use applications such as multiplayer gaming, peer-to-peer connections, real-time communications such as instant messaging, or remote assistance (a feature in Windows XP), enable Universal Plug and Play (UPnP). Add a Port Triggering Service To add a port triggering service: 1. Launch an Internet browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. Specify Internet Port Settings 79
![](/manual_guide/products/netgear-c6900-user-manual-8f0ca7a/79.png)