Netgear C7000 User Manual - Page 13
Call Comcast Xfinity to Set Up Your Internet Connection
View all Netgear C7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Nighthawk AC1900 WiFi Cable Modem Router 2. Launch a web browser. You are redirected to the Xfinity self-activation page. If you are not redirected to the Xfinity self-activation page, visit www.comcast.com/activate. 3. Provide your Xfinity credentials and complete the selfactivation process. This process might take up to 15 minutes, during which the modem router reboots a couple times. Call Comcast Xfinity to Set Up Your Internet Connection If you are unable to self-activate your modem router, call Comcast Xfinity customer service. Before you call Comcast Xfinity, make sure that your account number, account phone number, email address, and password are nearby. The modem router's model number is C7000. The serial number and MAC address are on the product label. MAC address Serial number Figure 5. Find the serial number and the MAC address on the product label To set up your Internet connection by calling Comcast Xfinity: 1. Call Comcast Xfinity customer service at 1-800-XFINITY (1-800-934-6489). 2. When asked, provide your account information and provide the modem router's model number and MAC address. 3. Wait for the Comcast Xfinity representative to confirm that your modem router is active. 4. If you do not get an Internet connection with the modem router, ask the Comcast Xfinity representative to look for your modem router online, and do one of the following depending on what the representative tells you about your modem router: • If the modem router is not visible, the Comcast Xfinity representative can give you instructions to verify why the modem router does not connect with your high-speed Internet service. • If the modem router is visible to the Comcast Xfinity representative, reboot the modem router. Check your online status again. Hardware Setup 13