Netgear C7100V User Manual - Page 123
Factory Settings
View all Netgear C7100V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
AC1900 Cable Modem Voice Router Factory Settings You can return the modem router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the modem router for at least seven seconds. The modem router resets and returns to the factory configuration settings shown in the following table. Table 3. Factory default settings Feature Modem router login Local network (LAN) Cable modem firewall WiFi Default setting User login URL www.routerlogin.com or www.routerlogin.net User name (case-sensitive) admin Login password (case-sensitive) user-generated password LAN IP 192.168.0.1 Subnet mask 255.255.255.0 DHCP server Enabled DHCP range 192.168.0.2 to 192.168.0.254 DHCP starting IP address Configured by the Internet provider DHCP ending IP address 192.168.0.254 DMZ Disabled Time zone As per the ISP/MSO ToD (time of day) Configuration Time zone adjusted for daylight saving time As per ISP/MSO ToD (time of day) server configuration SNMP Enabled Inbound (communications coming Disabled (except traffic on port 80, the HTTP port) in from the Internet) Outbound (communications going Enabled (all) out to the Internet) WiFi communication Enabled SSID name See the product label Security WPA2-PSK (AES) Broadcast SSID Enabled Country/region United States RF channel (2.4 GHz) Auto1 Supplemental Information 123