Netgear C7100V User Manual - Page 74
ADVANCED > Setup > LAN Setup, Use Router as DHCP Server
View all Netgear C7100V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
AC1900 Cable Modem Voice Router To specify the pool of IP addresses that the modem router assigns: 1. Launch an Internet browser from a computer or mobile device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login window opens. 3. Enter the user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Setup > LAN Setup. 5. Make sure that the Use Router as DHCP Server check box is selected. 6. Specify the range of IP addresses that the modem router assigns: a. In the Starting IP Address field, type the lowest number in the range. This IP address must be in the same subnet as the modem router. b. In the Ending IP Address field, type the number at the end of the range of IP addresses. This IP address must be in the same subnet as the modem router. 7. Click the Apply button. Your settings are saved. The modem router delivers the following parameters to any LAN device that requests DHCP: • An IP address from the range that you defined • Subnet mask • Gateway IP address (the modem router's LAN IP address) • DNS server IP address (the modem router's LAN IP address) Specify Network Settings 74