Netgear C7100V User Manual - Page 80
Wireless, Region, Enable SSID Broadcast, Name SSID, Channel, Up to 600 Mbps, Up to 289, For 2.4 GHz
View all Netgear C7100V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
AC1900 Cable Modem Voice Router 4. Select Wireless. 5. In the Region menu, select your region. In some locations, you cannot change this setting. 6. To control the SSID broadcast, select or clear the Enable SSID Broadcast check box. When this check box is selected, the modem router broadcasts its network name (SSID) so that it displays when you scan for local WiFi networks on your computer or mobile device. 7. To change the network name (SSID), type a new name in the Name (SSID) field. The name can be up to 32 characters long and it is case-sensitive. The default SSID is randomly generated and is on the modem router label. If you change the name, make sure to write down the new name and keep it in a safe place. 8. To change the WiFi channel, select a number in the Channel menu. In some regions, not all channels are available. Do not change the channel unless you experience interference (shown by lost connections or slow data transfers). If this happens, experiment with different channels to see which is the best. When you use multiple access points, it is better if adjacent access points use different channels to reduce interference. The recommended channel spacing between adjacent access points is four channels (for example, use Channels 1 and 5, or 6 and 10). 9. To change the mode, select it from the Mode menu. For 2.4 GHz, Up to 600 Mbps is the default setting. The other settings are Up to 289 Mbps and Up to 54 Mbps. Specify Network Settings 80