Netgear FSM750S FSM750S Reference Manual - Page 50
of 121
View all Netgear FSM750S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Main Menu> Advanced Menu> Port Trunking Port Trunking is a feature that allows multiple links between switches to work as one virtual link or aggregate link. Trunks can be defined for similar port types only. For example, a 10/100 port cannot form a Port Trunk with a gigabit port. For 10/100 ports, trunks can only be formed within the same bank. A bank is ports 1 to 8, ports 9 to 16, ports 17 to 24, or port 25 and port 26 (using an FSM726S as an example), on the same switch unit. Up to four trunks can be enabled at the same time within a stack. To set up a trunk, use the space bar to select the ports that will participate in the trunk. Spanning Tree will treat trunked ports as a single virtual port. Note: you must use straight-though cables for all links in the trunk. Do not use crossover cables. Note: you must disable auto-negotiation on the ports in a trunk prior to setting up the trunk. Figure 6-14: Port Trunking Page 49 of 121