Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 10

ProSafe Managed Switch Command Group or Command XSM7224S cos-queue random-detect no cos-queue random-detect random-detect exponential weighting-constant no random-detect exponential weighting-constant random-detect queue-parms no random-detect queue-parms Supported Supported Supported Supported Supported Supported Command Syntax GSM7212F/GSM7212P/ GSM7224P/GSM5212P Not supported Not supported Not supported Not supported Not supported Not supported A command is one or more words that might be followed by one or more parameters. Parameters can be required or optional values. Some commands, such as show network or clear vlan, do not require parameters. Other commands, such as network parms, require that you supply a value after the command. You must type the parameter values in a specific order, and optional parameters follow required parameters. The following example describes the network parms command syntax: Format network parms [gateway] • network parms is the command name. • and are parameters and represent required values that you must enter after you type the command keywords. • [gateway] is an optional parameter, so you are not required to enter a value in place of the parameter. The New Template User Manual lists each command by the command name and provides a brief description of the command. Each command reference also contains the following information: • Format shows the command keywords and the required and optional parameters. • Mode identifies the command mode you must be in to access the command. • Default shows the default value, if any, of a configurable setting on the device. The show commands also contain a description of the information that the command shows. Using the Command-Line Interface 10