Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 639

ProSafe Managed Switch RADIUS Commands This section describes the commands you use to configure the switch to use a Remote Authentication Dial-In User Service (RADIUS) server on your network for authentication and accounting. authorization network radius Use this command to enable the switch to accept VLAN assignment by the radius server. Default Format Mode disable authorization network radius Global Config no authorization network radius Use this command to disable the switch to accept VLAN assignment by the radius server. Format Mode no authorization network radius Global Config radius accounting mode Use this command to enable the RADIUS accounting function. Default Format Mode disabled radius accounting mode Global Config no radius accounting mode Use this command to set the RADIUS accounting function to the default value (disabled). Format Mode no radius accounting mode Global Config radius server attribute Use this command to specify the RADIUS client to use the NAS-IP Address attribute in the RADIUS requests. If the specific IP address is configured while enabling this attribute, the Management Commands 639