Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 644

ProSafe Managed Switch radius server retransmit Use this command to configure the global parameter for the RADIUS client that specifies the number of transmissions of the messages to be made before attempting the fall back server upon unsuccessful communication with the current RADIUS authenticating server. When the maximum number of retries are exhausted for the RADIUS accounting server and no response is received, the client does not communicate with any other server. Default Format Mode 4 radius server retransmit Global Config Field retries Description The maximum number of transmission attempts in the range of 1 to 15. no radius server retransmit Use this command to set the value of this global parameter to the default value. Format Mode no radius server retransmit Global Config radius server timeout Use this command to configure the global parameter for the RADIUS client that specifies the timeout value (in seconds) after which a request must be retransmitted to the RADIUS server if no response is received. The timeout value is an integer in the range of 1 to 30. Default Format Mode 5 radius server timeout Global Config Field retries Description Maximum number of transmission attempts in the range . no radius server timeout Use this command to set the timeout global parameter to the default value. Format Mode no radius server timeout Global Config Management Commands 644