Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 544

ProSafe Managed Switch no ip dhcp pool This command removes the DHCP address pool. The name should be previously configured pool name. Format Mode no ip dhcp pool Global Config client-identifier This command specifies the unique identifier for a DHCP client. Unique-identifier is a valid notation in hexadecimal format. In some systems, such as Microsoft DHCP clients, the client identifier is required instead of hardware addresses. The unique-identifier is a concatenation of the media type and the MAC address. For example, the Microsoft client identifier for Ethernet address c819.2488.f177 is 01c8.1924.88f1.77 where 01 represents the Ethernet media type. For more information, refer to the "Address Resolution Protocol Parameters" section of RFC 1700, Assigned Numbers for a list of media type codes. Default Format Mode none client-identifier DHCP Pool Config no client-identifier This command deletes the client identifier. Format Mode no client-identifier DHCP Pool Config client-name This command specifies the name for a DHCP client. Name is a string consisting of standard ASCII characters. Default Format Mode none client-name DHCP Pool Config no client-name This command removes the client name. Format Mode no client-name DHCP Pool Config Utility Commands 544