Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 660

ProSafe Managed Switch • Using IPv6 Management commands, you can send SNMP traps and queries via the network port. • The user can manage a device via the network port (in addition to a routing interface). network ipv6 enable Use this command to enable IPv6 operation on the network port. Default Format Mode enabled network ipv6 enable Privileged EXEC no network ipv6 enable Use this command to disable IPv6 operation on the network port. Format Mode no network ipv6 enable Privileged EXEC network ipv6 address Use this command to configure an IPv6 global address, enable or disable stateless global address autoconfiguration, and enable or disable dhcpv6 client protocol information for the network port. You can configure multiple IPv6 addresses on the network port. Format Mode network ipv6 address {address/prefix-length [eui64] | autoconfig | dhcp} Privileged EXEC Term address prefix-length eui64 autoconfig dhcp Definition IPv6 prefix in IPv6 global address format. IPv6 prefix length value. Formulate IPv6 address in eui64 format. Configure stateless global address autoconfiguration capability. Configure dhcpv6 client protocol. no network ipv6 address Use this command to: • Remove the manually configured IPv6 global address on the network port interface (with the address option). Management Commands 660