Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 76

ProSafe Managed Switch show vlan association subnet This command displays the VLAN associated with a specific configured IP-Address and net mask. If no IP address and net mask are specified, the VLAN associations of all the configured IP-subnets are displayed. Format Mode show vlan association subnet [ ] Privileged EXEC Term IP Subnet IP Mask VLAN ID Definition The IP address assigned to each interface. The subnet mask. There is a VLAN Identifier (VID) associated with each VLAN. show vlan association mac This command displays the VLAN associated with a specific configured MAC address. If no MAC address is specified, the VLAN associations of all the configured MAC addresses are displayed. Format Mode show vlan association mac [] Privileged EXEC Term MAC Address VLAN ID Definition A MAC address for which the switch has forwarding and or filtering information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as 8 bytes. There is a VLAN Identifier (VID) associated with each VLAN. Double VLAN Commands This section describes the commands you use to configure double VLAN (DVLAN). Double VLAN tagging is a way to pass VLAN traffic from one customer domain to another through a Metro Core in a simple and cost effective manner. The additional tag on the traffic helps differentiate between customers in the MAN while preserving the VLAN identification of the individual customers when they enter their own 802.1Q domain. Switching Commands 76