Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 320

ProSafe Managed Switch packets forwarded over the interface having TTL value below the configured value are dropped. The value for ranges from 0 to 255. Default Format Mode 1 ip multicast ttl-threshold Interface Config no ip multicast ttl-threshold This command applies the default to a routing interface. The is the TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from the interface. Format Mode no ip multicast ttl-threshold Interface Config ip mroute This command configures an IPv4 Multicast Static Route for a Source. src-addr is Source IP address of a multicast source or source IP route prefix. src-mask is Mask associated with the source IP address or source IP route prefix. rpf-addr is IP address to be used as the RPF address. The interface associated with this IP address, thus, is used as the incoming interface for the mroute. preference is Administrative distance for the mroute. The lower values have better preference. If the static mroute has the same distance as the other RPF sources, the static mroute will take precedence. The range is from 0 to 255. The default is 0 . Default Format Mode No MRoute is configured on the system ip mroute Global Config no ip mroute This command removes the configured IP Multicast Static Route. Format Mode noip mroute Global Config IP Multicast Commands 320