Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P CLI Manual - Page 561

ProSafe Managed Switch no capture all packets This command disables the capturing of all packets. Format Mode no capture all packets Global Config capture wrap This command enables the Buffer Wrapping configuration. Once the capture buffer is full, writes to the buffer will wrap around to allow continuous packet capture. Format Mode Default capture wrap Global Config Enabled show capture packets This command displays packets being captured from the buffer. The output of the show command can be redirected to a text file. The resultant text file can be fed to the text2pcap utility or the Ethereal public domain packet analyzer, which can then be translated to a cap file. Format Mode Default show capture packets Global Config Enabled Serviceability Packet Tracing Commands These commands improve the capability of network engineers to diagnose conditions affecting their managed switch product. CAUTION: The output of the debug commands can be long and may adversely affect system performance. debug arp Use this command to enable ARP debug protocol messages. Default disabled Utility Commands 561