Netgear M4250-26G4XF-PoE User Manual - Page 16

•

Video NDI4

: Use this template to connect the switch to video devices and cameras

that support Network Device Interface (NDI) version 4 with multi-TCP (mTCP)

transport.

•

Video NDI5 with Dante, Q-Sys or AES67 audio

: Use this template to connect the

switch to video devices and cameras that support NDI version 5 with Reliable User

Datagram Protocol (RUDP). Audio Dante, Q-SYS, or AES67 is supported at the same

time in the same VLAN.

•

Video with AES67 audio

: Use this template to connect the switch to IP video devices

and their controllers when AES67 audio is supported in the same VLAN.

This template can support devices such as Crestron DM NVX systems, AMX SVSI

products, ZeeVee products, Aurora Multimedia products, Kramer products, Atlona

products, products that support Libav, Visionary Solutions products, Wyrestorm

products, Extron NAV products, Dante video products, and products that comply

with standardization by the SDVoE Alliance.

•

Video with Dante audio


and their controllers when Dante audio is supported in the same VLAN.






•

Video with Q-SYS audio


and their controllers when Q-SYS audio is supported in the same VLAN.






About audio video bridging

802.1AS timing and synchronization is an audio video bridging (AVB) feature. AVB (also

referred to as 802.1AS) requires a license. For information about purchasing a license,

contact NETGEAR or your local NETGEAR reseller.

The IEEE 802.1AS standard specifies the protocol and procedures used to ensure that

the QoS requirements are guaranteed for time-sensitive applications, such as audio

and video.

The IEEE 1588 Precision Time Protocol (PTP) forms the basis of the IEEE 802.1AS

standard. PTP specifies a precise clock synchronization protocol that relies on

time-stamped packets.

Audio Video User Manual

16

Audio-Video Profile Templates

and Network Profiles

AV Line of Fully Managed Switches M4250 Series

Section	Page
Contents	5
1. Getting Started with the AV UI	8
Supported Switches	9
Available publications	9
AV local browser UI overview	9
Use a web browser to log in to the AV UI	10
Log in to the AV UI using the management interface default IP address	10
Log in to the AV UI over the OOB port	11
Log in to the AV UI with a known IP address	12
Save the running configuration to the startup configuration	12
Register your switch	12
2. Audio-Video Profile Templates and Network Profiles	14
Overview of preconfigured AV profile templates	15
About audio video bridging	16
About PTP residency time stamping	17
Network profiles	18
Change the Default VLAN profile	18
Use an AV profile template to configure and assign a network profile	19
Change a network profile	21
Remove a network profile	22
Custom AV profile templates	23
Create a custom AV profile template	23
Change a custom AV profile template	25
Remove a custom AV profile template	27
Auto-Trunk overview	27
Enable or disable Auto-Trunks	29
Configure PTP residency time stamping	29
Configure the IGMP querier for a network profile	30
3. Link Aggregation	33
Auto-LAG overview	34
Enable or disable Auto-LAGs	35
Configure the hash mode for Auto-LAGs	36
Create a LAG	37
Change a LAG	38
Remove a LAG	39
4. Multicast	41
Configure the multicast mode for one or more ports	42
Add or remove blocked multicast address ranges	43
Display the multicast groups in your network	44
5. Power over Ethernet	46
Manage PoE interface settings	47
Disable PoE for one or more interfaces	50
PoE schedules	51
Create a PoE schedule	51
Change a PoE schedule	54
Remove a PoE schedule	54
Display the total PoE consumption for the switch	55
6. Port Configuration	56
Administratively enable or disable one or more interfaces	57
Add a description to one or more interfaces	58
Set the frame size for one or more interfaces	58
Configure flow control for one or more interfaces	59
Display detailed information about the physical ports and LAGs	61
7. Security	62
Port authentication	63
Manage port authentication for individual ports	63
Manage 802.1X authentication	64
Remove port authentication from individual ports	65
RADIUS servers	66
Configure the basic settings for a RADIUS server	66
Remove a RADIUS server	67
8. Manage and monitor the switch	69
Licenses	70
Add a license online	70
Add a license offline	71
Delete a license	72
Update the firmware	72
Startup configuration	73
Save the running configuration	73
Download the running configuration	74
Restore the configuration	75
Date and time settings	75
Manually set the date and time	76
Configure one or more SNTP servers	76
Add a system name	77
Management interface IP address	78
Set a fixed IP address for the management interface	78
Enable the DHCP client for the management interface	79
OOB port IP address	80
Set a fixed IP address for the OOB port	80
Enable the DHCP client for the OOB port	81
Set the STP network redundancy for the switch	82
Restart the switch from the AV UI	84
Reset the switch to factory default settings	84
Manually control the fans	85
Display the status of the ports and switch	86
Display the neighboring devices	90
9. Diagnostics and Troubleshooting	91
Manage the switch log, console log, and command log	92
Display or download the message log	93
Display or clear the port statistics	94
Send a ping, traceroute, or DNS lookup request to an IP address or host name	96
Perform a cable test	97
Configure port mirroring	98
Access the CLI through the terminal in the AV UI	99

Netgear M4250-26G4XF-PoE User Manual - Page 16

About audio video bridging - kramer +

Page 16 highlights