Netgear M4250-26G4XF-PoE User Manual - Page 80
OOB port IP address, Set a fixed IP address for the OOB port
![]() |
View all Netgear M4250-26G4XF-PoE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
AV Line of Fully Managed Switches M4250 Series WARNING: If you are logged in to switch over the management interface, when you click the Apply button, you are disconnected and need to log in to the switch at the new IP address that is assigned by the DHCP server. If you do not know the new IP address, determine it by accessing the DHCP server or by using an IP scanner utility. 6. Click the Apply button. Your settings are saved. The window closes. The Overview page displays again. 7. To save the settings to the running configuration, at the top of the page, click the Save icon or text. OOB port IP address The OOB port, also referred to as the IPv4 service port, is a dedicated Ethernet port for out-of-band (OOB) management of the switch. Traffic on this port is segregated from operational network traffic on the switch ports and cannot be switched or routed to the operational network. By default, no IP address is set for the OOB port, but its DHCP client is enabled so that the port can receive an IP address from a DHCP server in your network. If the OOB port does not receive an IP address from a DHCP server in your network, the IP address for the port is set to 192.168.0.239 with 255.255.255.0 as the subnet mask. The same occurs if you connect the OOB port directly to a computer and reboot the switch. You can also set a fixed IP address for the OOB port. Set a fixed IP address for the OOB port By default, no IP address is set for the OOB port and the DHCP client is enabled. You can disable the DHCP client for the OOB port and set a fixed (static) IP address. To set a fixed IP address for the OOB port: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter admin as the user name, in the Password field, enter your local device password, and click the AV UI Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. Manage and monitor the switch 80 Audio Video User Manual
![](/manual_guide/products/netgear-m425010g2xfpoe-user-manual-8067790/80.png)