Netgear M4250-26G4XF-PoE User Manual - Page 56
Port Configuration
![]() |
View all Netgear M4250-26G4XF-PoE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
6 Port Configuration For the physical ports and LAGs on the switch, you can display the settings and configure the administrative mode of a port or LAG (both of which are enabled by default), the frame size for a port, and the flow control for a port. You can also add port descriptions. Note: In this chapter, we use the term interface to indicate both physical ports and link aggregation interfaces.. The chapter contains the following sections: • Administratively enable or disable one or more interfaces • Add a description to one or more interfaces • Set the frame size for one or more interfaces • Configure flow control for one or more interfaces • Display detailed information about the physical ports and LAGs 56
![](/manual_guide/products/netgear-m425010g2xfpoe-user-manual-8067790/56.png)
6
Port Configuration
For the physical ports and LAGs on the switch, you can display the settings and configure
the administrative mode of a port or LAG (both of which are enabled by default), the
frame size for a port, and the flow control for a port. You can also add port descriptions.
Note:
In this chapter, we use the term
interface
to indicate both physical ports and link
aggregation interfaces..
The chapter contains the following sections:
•
Administratively
enable
or
disable
one
or
more
interfaces
•
Add
a
description
to
one
or
more
interfaces
•
Set
the
frame
size
for
one
or
more
interfaces
•
Configure
flow
control
for
one
or
more
interfaces
•
Display
detailed
information
about
the
physical
ports
and
LAGs
56