Home » Netgear Manuals » Hubs & Switches » Netgear M4250-26G4XF-PoE » Manual Viewer

Netgear M4250-26G4XF-PoE User Manual - Page 31

Querier VLAN address, AV UI Login

View all Netgear M4250-26G4XF-PoE manuals

Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

AV Line of Fully Managed Switches M4250 Series To configure the IGMP querier for a network profile: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login page displays. 3. In the Login Name field, enter admin as the user name, in the Password field, enter your local device password, and click the AV UI Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The Overview page displays. 4. Select Configure > Network Profiles. The Network Profiles page displays. 5. In the Configured Profiles table, to the right of the network profile that you want to change, click the 3 dots icon and select Querier. The Edit default querier profile window displays. 6. Configure the settings for the querier: • Election Participate: Select to enable or disable the querier election participate mode for the network profile": - Enabled: Turn on the toggle so that it displays green and is positioned to the right. This setting indicates that the querier for the network profile participates in querier election, in which the lowest numbered IP address operates as the querier in the VLAN. Any other querier moves to the non-querier state. - Disabled: Turn off the toggle so that it displays gray and is positioned to the left. This setting indicates that if the querier for the network profile detects another querier of the same version in the VLAN, the snooping querier moves to the non-querier state. Except for the Default network profile, the election participation is disabled by default, and the toggle displays gray and is positioned to the left • Querier VLAN address: Specify the IP address to be used as the source IP address in periodic IGMP queries that are sent on the VLAN. By default, the operational state is QUERIER, indicating that the network profile can function as a querier. 7. Click the Apply button. Your settings are saved. Audio-Video Profile Templates 31 and Network Profiles Audio Video User Manual

Section	Page
Contents	5
1. Getting Started with the AV UI	8
Supported Switches	9
Available publications	9
AV local browser UI overview	9
Use a web browser to log in to the AV UI	10
Log in to the AV UI using the management interface default IP address	10
Log in to the AV UI over the OOB port	11
Log in to the AV UI with a known IP address	12
Save the running configuration to the startup configuration	12
Register your switch	12
2. Audio-Video Profile Templates and Network Profiles	14
Overview of preconfigured AV profile templates	15
About audio video bridging	16
About PTP residency time stamping	17
Network profiles	18
Change the Default VLAN profile	18
Use an AV profile template to configure and assign a network profile	19
Change a network profile	21
Remove a network profile	22
Custom AV profile templates	23
Create a custom AV profile template	23
Change a custom AV profile template	25
Remove a custom AV profile template	27
Auto-Trunk overview	27
Enable or disable Auto-Trunks	29
Configure PTP residency time stamping	29
Configure the IGMP querier for a network profile	30
3. Link Aggregation	33
Auto-LAG overview	34
Enable or disable Auto-LAGs	35
Configure the hash mode for Auto-LAGs	36
Create a LAG	37
Change a LAG	38
Remove a LAG	39
4. Multicast	41
Configure the multicast mode for one or more ports	42
Add or remove blocked multicast address ranges	43
Display the multicast groups in your network	44
5. Power over Ethernet	46
Manage PoE interface settings	47
Disable PoE for one or more interfaces	50
PoE schedules	51
Create a PoE schedule	51
Change a PoE schedule	54
Remove a PoE schedule	54
Display the total PoE consumption for the switch	55
6. Port Configuration	56
Administratively enable or disable one or more interfaces	57
Add a description to one or more interfaces	58
Set the frame size for one or more interfaces	58
Configure flow control for one or more interfaces	59
Display detailed information about the physical ports and LAGs	61
7. Security	62
Port authentication	63
Manage port authentication for individual ports	63
Manage 802.1X authentication	64
Remove port authentication from individual ports	65
RADIUS servers	66
Configure the basic settings for a RADIUS server	66
Remove a RADIUS server	67
8. Manage and monitor the switch	69
Licenses	70
Add a license online	70
Add a license offline	71
Delete a license	72
Update the firmware	72
Startup configuration	73
Save the running configuration	73
Download the running configuration	74
Restore the configuration	75
Date and time settings	75
Manually set the date and time	76
Configure one or more SNTP servers	76
Add a system name	77
Management interface IP address	78
Set a fixed IP address for the management interface	78
Enable the DHCP client for the management interface	79
OOB port IP address	80
Set a fixed IP address for the OOB port	80
Enable the DHCP client for the OOB port	81
Set the STP network redundancy for the switch	82
Restart the switch from the AV UI	84
Reset the switch to factory default settings	84
Manually control the fans	85
Display the status of the ports and switch	86
Display the neighboring devices	90
9. Diagnostics and Troubleshooting	91
Manage the switch log, console log, and command log	92
Display or download the message log	93
Display or clear the port statistics	94
Send a ping, traceroute, or DNS lookup request to an IP address or host name	96
Perform a cable test	97
Configure port mirroring	98
Access the CLI through the terminal in the AV UI	99

Match case Limit results 1 per page

To configure the IGMP querier for a network profile:

Launch a web browser.

In the address field of your web browser, enter the IP address of the switch.

The login page displays.

In the

field, enter

admin

as the user name, in the

Password

field, enter

your local device password, and click the

AV UI Login

button.

The first time that you log in, no password is required. However, you then must

specify a local device password to use each subsequent time that you log in.

The Overview page displays.

Select

Configure > Network Profiles

The Network Profiles page displays.

In the Configured Profiles table, to the right of the network profile that you want to

change, click the

3 dots

icon and select

Querier

The Edit default querier profile window displays.

Configure the settings for the querier:

•

Election Participate

: Select to enable or disable the querier election participate

mode for the network profile":

Enabled

: Turn on the toggle so that it displays green and is positioned to the

right. This setting indicates that the querier for the network profile participates

in querier election, in which the lowest numbered IP address operates as the

querier in the VLAN. Any other querier moves to the non-querier state.

Disabled

: Turn off the toggle so that it displays gray and is positioned to the

left. This setting indicates that if the querier for the network profile detects

another querier of the same version in the VLAN, the snooping querier moves

to the non-querier state.

Except for the Default network profile, the election participation is disabled by

default, and the toggle displays gray and is positioned to the left

•

Querier VLAN address

: Specify the IP address to be used as the source IP address

in periodic IGMP queries that are sent on the VLAN.

By default, the operational state is QUERIER, indicating that the network profile can

function as a querier.

Click the

Apply

button.

Your settings are saved.

Audio Video User Manual

Audio-Video Profile Templates

and Network Profiles

AV Line of Fully Managed Switches M4250 Series