Netgear SRK60B03 User Manual - Page 12
Orbi Pro WiFi system LEDs, Add-on Orbi Pro satellite LEDs
View all Netgear SRK60B03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Orbi Pro WiFi system LEDs The following table describes the LED behavior for an Orbi Pro router (model SRR60) and Orbi Pro satellite (model SRS60) that are purchased together and come in the same package. Table 1. Orbi ProWiFi System router and satellite LED descriptions LED Power LED LED Behavior The Power LED is located above the Power On/Off button on the rear panel. • Solid green. Power is on. • Solid amber. The router or satellite is booting. • Blinking amber. The router or satellite is resetting to factory default settings. • Blinking red. The firmware is corrupted. • Off. Power is not supplied. Router ring LED The ring LED is located on the top. • Pulsing white. The router is booting or someone pressed the Sync button. • Off. The router finished booting and is working normally. • Solid white. The router is resetting to factory default settings. • Solid magenta. The router cannot connect to the Internet. See You cannot access the Internet on page 151. Satellite ring LED This satellite is included when you buy an Orbi router. The ring LED is located on the top. • Pulsing white. The satellite is booting. • Blue for three minutes. The connection between the satellite and the router is good. • Amber for three minutes. The connection between the satellite and the router is fair. • Magenta. The satellite failed to sync to the router. See The router and satellite do not sync on page 149. • Off. The satellite synced to the router and is working normally. Add-on Orbi Pro satellite LEDs The following table describes the LED behavior for an add-on Orbi Pro satellite (model SRS60) that was purchased separately from the Orbi Pro kit. Overview 12 User Manual