Netgear SRK60B03 User Manual - Page 48
Manage MAC access control lists for WiFi networks and the LAN
View all Netgear SRK60B03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 Manage MAC access control lists for WiFi networks and the LAN A MAC access control list (ACL) for a WiFi network (that is, an SSID) or the wired network (that is, the LAN) allows or denies a device access to the network based only on the MAC address of the device. If you block a device for one WiFi network or for the wired network, the device is blocked only for that WiFi network or for the wired network. You can set up an independent MAC ACL for each WiFi network and for the wired network. (The router supports a total of five MAC ACLs.) With a MAC ACL, you can allow or deny access to a device on a specific WiFi network or the wired network. Note: A MAC ACL differs from the network access control list (see Manage the Orbi network access control list on page 53). The network access control list is not specific to a particular WiFi network or to the wired network but is based on both WiFi and wired devices that the router detects on the entire Orbi network. To allow or deny access to a device on a specific WiFi network or the wired network, use a MAC ACL. MAC ACLs and the network access control list are mutually exclusive. Use either MAC ACLs or the network access control list. If you set up a MAC ACL with a policy that allows access to a specific network, devices on the MAC ACL are an exception to the default policy: • A device for which you place the MAC address on the MAC ACL is denied access to that network. • All other devices are allowed access to that network. If you set up a MAC ACL with a policy that denies access to a specific network, devices on the MAC ACL are an exception to the default policy: • A device for which you place the MAC address on the MAC ACL is allowed access to that work. • All other devices are denied access to that network. A blocked device can still get an IP address from the router but cannot communicate with other devices on the network or connect to the Internet. Note: Each network device owns a MAC address, which is a unique 12-character physical address, containing the hexadecimal characters 0-9, a-f, or A-F (uppercase or lowercase) only, and separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of a device. If you cannot see the label, you can display the MAC address using the network configuration utilities of a computer. You might also find the MAC addresses on Attached Devices page of the router (see View satellites, WiFi devices, and wired devices connected to the Orbi network on page 117). Control Access to the Internet 48 User Manual