Netgear SRK60B03 User Manual - Page 81
Change the admin WiFi password or security level, Channel, Apply
View all Netgear SRK60B03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 The name can be up to 32 characters long and it is case-sensitive. The default SSID is randomly generated and is on the router label. If you change the name, make sure to write down the new name and keep it in a safe place. 6. To change the 2.4 GHz or 5 GHz WiFi channel, select a number from the Channel menus. In some regions, not all channels are available. Do not change the channel unless you experience interference (shown by lost connections or slow data transfers). If this happens, experiment with different channels to see which channel works bets for your. When you use multiple routers, satellites, or extenders in your network (access points), you experience less interference if adjacent access points use different. The recommended channel spacing NETGEAR recommends a minimum of four channels between adjacent access points (for example, use channels 1 and 5, or 6 and 10). 7. Click the Apply button. Your settings are saved. The router sends the new settings to the satellite. If you are using a WiFi connection and you changed the SSID, you are disconnected from the network. 8. Make sure that you can connect to the WiFi network with its new settings. If you cannot connect using WiFi, check the following: • Is your WiFi-enabled computer or mobile device connected to another WiFi network in your area? Some WiFi devices automatically connect to the first open network without WiFi security that they discover. • Is your computer or WiFi device trying to connect to your network with its old settings (before you changed the settings)? If so, update the WiFi network selection in your computer or WiFi device to match the current settings for your network. Change the admin WiFi password or security level We recommend that you do not disable security for your WiFi network. Note: The router web interface calls the admin WiFi network the Wireless 1 network. To change the admin WiFi password or WPA settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. Specify Network Settings 81 User Manual